Ice Water Tank Cold Change CC-IB-13

Cold Change Hydro-cooling quickly reduces the core temperature of fresh produce, prolonging shelf life while maintaining taste and appearance.

The system consists of a pool with a flooded stainless steel exchanger over which ice is accumulated and a lifting system that submerges the product in the water allowing faster cooling than with the shower system and allowing the addition of sealants that greatly prevent subsequent weight loss in long shipments of goods.

-Capacity for 2 loaded pallets at a height of 1.7 m approximately.
-Water tank built in cement fiber, thermally insulated and with a capacity of 12,000 L.
-Pump for emptying and cleaning the tank.
-Water level control system in the tank regulated by means of a level sensor in stainless steel AISI 316.
-Stainless steel submerged plate heat exchanger with 32 m2 exchange surface.
-Lifting columns, fences and protections in galvanised steel with powder coating.
-Pallet support bases and horizontal locks made of stainless steel electro-welded grid
-System of agitation of the water in the tank by means of forced air bubbles to increase the convection and improve the thermal exchange.
-Dedicated electrical panel integrated in the equipment.
-2 pallets every 8 minutes.
-Cooling capacity : 8000 kg of cherries in 60 minutes.

Technical data :

Model : HC4
Serial number: 180311-XXX
Capacity: 2 pallets 1,20m*1,00m*1,7m
Cooling fluid: Propylene Glycol / Temper -20 / Ammonia
Cooling inlet temperature (°C): -5
Voltage (V) 400
Phases: 3
Frequency (Hz): 50
Maximum intensity (A): 16
Maximum pumped water flow rate (m3/h): 40
Maximum air flow rate (m3/h): 70
Cooling capacity (kW): 180
Maximum energy in ice accumulation (kWh): 70
Dimensions (L*W*H) 3120mm*2200mm* +/- 2000 mm