This Eco model is designed for high-volume packhouses that need sixteen-pallet batches and want the vacuum and refrigeration plant engineered around the actual cooling duty and operating pattern.<\/p>\n
For a sixteen-pallet packhouse, coordinated plant controls and loading logistics are central to an Eco feasibility review. Compare complete-system electricity and throughput across representative shifts, including idle and turnaround periods where relevant.<\/p>\n
Compare the standard 16-pallet vacuum cooler<\/a> \u00b7 Eco range overview<\/a> \u00b7 Request an application-specific Eco quotation<\/a>.<\/p>\n Final equipment selection will be based on product characteristics, batch mass, temperature pull-down, packaging, required cycles per hour and local utilities. No unsupported fixed savings percentage will be stated.<\/p>\n <\/p>\n The 16 Pallet ECO Vacuum Cooler is intended for high-volume operations that want to evaluate energy use as part of the complete batch-cooling process. The chamber format accommodates sixteen pallets per batch, while the vacuum, refrigeration and control systems are selected around the actual product, packaging, throughput and site conditions.<\/p>\n \u201cECO\u201d describes the engineering approach rather than a fixed savings claim. The design review looks at when pumping capacity is required, how condensation duty changes through the cycle and how the plant is expected to run across full, partial and idle periods. This produces a project-specific operating basis that can be compared with the standard 16 Pallet Vacuum Cooler<\/a>.<\/p>\n A sixteen-pallet chamber is most useful when its batch pattern fits the wider packing and dispatch plan. Before equipment selection, Cold Change reviews the required pallets per hour, the number of operating shifts, the expected product mix and the time allowed between loads. Peak days and seasonal variations matter, as do loading delays, sanitation windows and planned idle periods.<\/p>\n This planning step avoids treating chamber capacity as the only design variable. Two sites loading the same number of pallets may require different vacuum and refrigeration arrangements if their products, initial temperatures, target temperatures or daily schedules differ. Batch weight, pallet dimensions and packaging airflow are therefore confirmed at quotation rather than assumed from the chamber name.<\/p>\n The ECO configuration can use variable-speed vacuum pumping so that motor output follows the required evacuation profile instead of operating at one fixed level throughout every stage. The control strategy is developed around the selected pumps, product load and process sequence. Its purpose is to match available pumping capacity to the duty while maintaining the required process control.<\/p>\n Actual electrical consumption depends on the complete installation and the way it is operated. For that reason, any comparison with a standard configuration should use an agreed operating profile, equipment schedule and measurement boundary. Cold Change does not apply a universal energy-saving percentage to every sixteen-pallet project.<\/p>\n Vacuum cooling removes heat through moisture evaporation, and the resulting vapour must be managed by the condensing system. Refrigeration duty is assessed alongside the evacuation sequence, not as an isolated nameplate value. Product load, starting condition, target temperature, ambient conditions and batch frequency all affect the project requirement.<\/p>\n For a production line running repeated batches, the review also considers recovery between cycles and the effect of the planned daily schedule. Where production varies, the design basis can include both peak and partial-shift cases. This helps the selected equipment reflect the intended workload without presenting a generic performance figure as a guaranteed result.<\/p>\n PLC and HMI controls provide the operator interface for recipes, cycle stages, alarms and operating information. Recipes can be developed for different products or load conditions after commissioning data is available. Access levels and set-point limits can also be agreed during the controls review.<\/p>\n The control system is intended to support consistent operation and a clear record of the chosen process. Final instrumentation, data logging, remote access and plant-integration requirements are project options and should be defined before manufacture. They are not assumed to be identical at every site.<\/p>\n The chamber must fit the real material flow around it. The project review covers available floor space, door approach, pallet movement, drainage, service access and the relationship with upstream and downstream equipment. Manual loading, conveyor interfaces or other handling arrangements can be reviewed where specified.<\/p>\n Electrical supply, ambient design conditions and available utilities are checked as part of the quotation process. The same applies to installation access and maintenance clearances. These details can change the most suitable arrangement even when the nominal chamber capacity remains sixteen pallets.<\/p>\n Vacuum cooling is particularly relevant where the product can release moisture under reduced pressure and the packaging allows vapour to move effectively. Suitability cannot be determined from pallet count alone. Product structure, moisture behaviour, pack format, liner configuration, vent area and pallet build all influence the cooling response.<\/p>\n Cold Change uses available application data and, where appropriate, trial information to establish the project basis. If the product or packaging changes materially, the operating recipe and expected result may also change. Any quoted performance should therefore be tied to the agreed product and load definition.<\/p>\n The standard and ECO versions serve the same sixteen-pallet batch category but provide different engineering routes. A useful comparison should include the proposed vacuum equipment, refrigeration arrangement, control philosophy, expected batch schedule, installed electrical requirements and agreed operating assumptions.<\/p>\n Energy should be compared over a defined production period rather than inferred from a single component or marketing label. Where operating data is available, Cold Change can help establish a baseline and identify what will be measured. The appropriate choice may depend on throughput stability, product mix, operating hours, site utilities and the customer\u2019s investment priorities.<\/p>\n These inputs allow the chamber, vacuum pumps, condensing system and controls to be assessed as one operating system. Final dimensions, components, performance commitments and commercial terms are confirmed in the project quotation.<\/p>\n See the full vacuum cooler range<\/a>, compare the standard 16 Pallet Vacuum Cooler<\/a>, or request a project quotation<\/a> with your product and production details.<\/p>","protected":false},"excerpt":{"rendered":" 16 Pallet Eco Vacuum Cooler<\/strong> is designed for high-volume packhouses requiring substantial batch throughput with variable-speed vacuum pumping.<\/p>","protected":false},"featured_media":3141,"comment_status":"open","ping_status":"closed","template":"","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}}},"product_brand":[],"product_cat":[23,26],"product_tag":[],"class_list":{"0":"post-3112","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-cold-chain-products","7":"product_cat-vacuum-cooling","8":"desktop-align-left","9":"tablet-align-left","10":"mobile-align-left","12":"first","13":"instock","14":"shipping-taxable","15":"product-type-simple"},"yoast_head":"\nEco engineering focus<\/h3>\n
\n
Project sizing<\/h3>\n
16 Pallet ECO Vacuum Cooler<\/h2>\n
Start with the production schedule<\/h2>\n
Variable-speed vacuum pumping<\/h2>\n
Refrigeration and condensation duty<\/h2>\n
Controls for repeatable operation<\/h2>\n
Loading and site integration<\/h2>\n
Product and packaging suitability<\/h2>\n
How to compare the ECO and standard designs<\/h2>\n
Information needed for a project quotation<\/h2>\n
\n